Istruction Manual for Operation and Maintenance SPX-960:
PROBLEMS CAUSES SOLUTION
The starter will not work or runs Connections slackened or corroded Clean the connections and tighten
slowly. them.
Incorrect oil Fill with the correct oil.
Key switch defective Replace it.
The lights in the dashboard Fuse blown Replace the fuse.
do not work.
The sensors do not work properly. Replace the sensors.
Cables broken Check the cables and repair them.
HYDRAULIC SYSTEM
The hydraulic movements Oil cool Let the temperature in the
hydraulic are too slow.
Incorrect oil Fill with the correct oil.
Excessively slow engine speed Contact an authorized dealer.
Hydraulic pump broken Contact an authorized dealer.
Excessively high oil temperature Incorrect oil Fill with the correct oil.
Filter clogged Replace the fi lter.
Hydraulic pump broken Contact an authorized dealer.
Radiator or exchanger clogged
Clean the fi ns and straighten them up.
Oil exchanger defective Contact an authorized dealer.
Dirty oil Change the oil.
The oil tends to foam. Air suction from tank to pump. Locate the problem and fi x it.
Incorrect oil Fill with the correct oil.
Water present in the oil Change the oil.
5
5-24
MAINTENANCE
To Next Page
Loading...