Istruction Manual for Operation and Maintenance SPX-960:
It is prohibited to maintain or lubricate the machine while
it is in operation with moving parts.
Before servicing the machine, cut the power supply out, stop
the machine and carefully read the instructions and warning
remarks provided in the instruction manual.
Be careful with hot or superheated parts. Under no circum-
stances should hot parts of the engine, exhaust muffl er,
etc. be contacted.
Be careful when opening the cap of the water cooling radia-
tor.
Switch the engine off and let the water cool down before ope-
ning the cap to prevent hot water from spraying out on persons.
Wear protective gloves
Do not drill the piping in the hydraulic system. The oil is
at high pressure and may burst out.
Read the relevant sections of the instruction manual before
carrying out work, maintenance, replacement operations or
other activities on the hydraulic system pipes.
Wear protective gloves.
Under no circumstances should the operator start the
machine up if he is not sitting in his seat. The operator
must always start the machine from his seat.
Do not try and ignite the engine by short circuiting the star-
ter.
Be careful when using the auxiliary ignition cables. If auxiliary
ignition cables are necessary, follow the instructions provided
in the manual.
2
2-9
SAFETY RULES
To Next Page
Loading...