How to Erase
You can only erase CD-RW discs.
You can erase one or more tracks from the end of the
CR-RW disc, or you can erase the entire disc. If
finalized, erasing a track or the disc automatically
unfinalizes the disc.
Push and release ERASE
• Once to select erasing the last track of the disc,
• Twice in succession to erase the entire disc,
• Three times in succession to unfinalize.
REC/PLAY
ERASE FINALIZE
REC
SELECT
PUSH ENTER
3 2 1
How to Erase the last track
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
their total playing time (example shown).
2 Push ERASE.
ERASE TRACK is
displayed for about 3
seconds.
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
3 Push the SELECT
PUSH/ENTER control.
The timer (a) counts
down as the track is
erased.
When done the
display shows the
remaining number of
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
a
Then PUSH ENTER
is displayed.
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
tracks and their total playing time (example shown).
1 Push Stop. The
display shows the
number of tracks and
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
1 Push Stop. The
display shows the
number of tracks and
their total playing time (example shown).
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
How to Erase the entire disc
2 Push ERASE twice.
After the first push
ERASE TRACK is
displayed.
- 30 -
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
Then PUSH ENTER
is displayed.
TOTAL TRACK
CD-R
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
CD-RW
a
3 Push the SELECT
PUSH/ENTER control.
The timer (a) counts
down as the disc is
erased.
When done the
display shows BLANK
DISC.
TOTAL TRACK
CD-RW
R
L
dB-50 -30 -22 -16 -12 -8 -4 0
After the second push
ERASE DISC is
displayed for about
three seconds.
How to Finalize
Finalizing is writing the TOC (table of contents) on a
disc so a CD player can recognize the number of
tracks, the total time for each track, and their location
on the disc. A recorded disc must be finalized to
playback on a standard CD player. Once finalized a
CD-R disc can be played on CD players that support
CD-R playback. CD-RW discs can only be played on
CD players that support CD-RW playback. Consult
your CD player owner's manual to confirm supported
formats.
Finalizing is necessary to:
• be able to play a recorded CD-R or CD-RW disc on
a CD player including the PSD300 CD drive
• prevent further recording on a disc
• avoid erasing tracks on a CD-RW disc
• record text information onto a disc you record
Notes:
• A finalized CD-R disc can never be recorded onto
again.
• A finalized CD-RW disc can be unfinalized for more
recording.
• The PSD300 can play back unfinalized CD-R or
CD-RW discs in the CDR drive.
• Several recording modes automatically finalize:
COPY 2X+FINAL, and SYNC RECORD+FINAL.
To Next Page
Loading...
