396-4412Y1 QuickDraw 3000 Operator’s Manual 3 Revised 02/20/2020
Safety
TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS USED TO CALL
YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY AND THE SAFETY OF
OTHERS. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.
Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropri-
ate signal word for each has been selected using the following guidelines:
DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death
or serious injury. This signal word is to be limited to the most extreme situations typically for
machine components which, for functional purposes, cannot be guarded.
WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death
or serious injury, and includes hazards that are exposed when guards are removed. It may also
be used to alert against unsafe practices.
CAUTION: Indicates a potentially hazardous situation that, if not avoided, may result in minor
or moderate injury. It may also be used to alert against unsafe practices.
NOTICE is used to address safety practices not related to personal safety.
The QuickDraw is designed to batch and mix agricultural chemicals.
It is the responsibility of the user to store, handle, and mix these chemicals safely.
The operator should refer to the chemical label and MSDS for complete instructions on handling and mixing of
the products being used.
All operators should be trained in the safe handling of chemicals, personal protective equipment needed, and
what to do in the case of a chemical spill.
To Next Page
Loading...