396-4412Y1 QuickDraw 3000 Operator’s Manual 15 Revised 02/20/2020
Product Hose Rinse
At bottom left
on Job Screen
Enter Hose Length and Hose Diameter and
check the Rinse Hose box so the chemical
in the hose will be accounted for.
After all the products have been
added, this screen will appear. See
additional instructions on next page.
Rinse a product hose with the carrier, while accounting for the chemical
in the hose and the carrier used for rinsing as part of the batch.
To Next Page
Loading...