3-74 ENGINE
Driveshaft assembly
• Remove the right end bearing 1, washer and 1st (low) driven
gear 2.
• Remove the 1st (low) driven gear bushing 3, washer and the
5th driven gear 4.
• Remove the circlip, washer and 4th driven gear 5.
" 09900-06107: Snap ring pliers
• Remove the 4th driven gear bushing 6, lock washers, 3rd driven
gear 7, 3rd driven gear bushing 8 and washer.
• Remove the circlip and 6th (top) driven gear 9.
" 09900-06107: Snap ring pliers
To Next Page
Loading...
