ENGINE 3-79
• Turn the bearing to install the bearing dowel pin
C in the posi-
tion.
• Install the oil seal
1.
TRANSMISSION
• Install the countershaft assembly on the upper crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Install the driveshaft assembly on the upper crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Turn the bearings to install the bearing dowel pins
A in the
respective positions.
To Next Page
Loading...
