FI SYSTEM DIAGNOSIS 5-97
SENSORS
IAP SENSOR INSPECTION
The intake air pressure sensor is located at the right and left
side of the air cleaner box. (#6-13)
IAP SENSOR REMOVAL AND
INSTALLATION
• Remove the fuel tank. (#6-3)
• Remove the IAP sensors from the air cleaner chamber.
• Install the IAP sensors in the reverse order of removal.
TP SENSOR INSPECTION
The throttle position sensor is installed on the No. 2 throttle
body. (#5-41)
TP SENSOR REMOVAL AND INSTALLATION
• Remove the fuel tank. (#6-3)
• Remove the right air cleaner box. (#6-13)
• Remove the TP sensor and disconnect the coupler
1.
! 09930-11950: Torx wrench
• Install the TP sensor to the No. 2 throttle body. (#6-19)
TPS ADJUSTMENT
• Adjust the TP sensor. (#5-20)
To Next Page
Loading...
