PERIODIC MAINTENANCE 2-7
EXHAUST CONTROL VALVE
• Remove the rubber cover
1.
Check the exhaust control valve actuator
2 for its movement
when the ignition switch is turned on. If the exhaust valve actua-
tor does not move, check exhaust valve actuator electrical circuit
and exhaust valve carbon sticking. Check the exhaust control
cable play. ($7-12)
• Remove the two bolts and cover.
• Check the lock nuts tightness. If the lock nuts are loose,
adjust the cable play and tighten the lock nuts.
NOTE:
Install the rubber cover
1 correctly after inspecting it.
Inspect initially at 1 000 km (600 miles, 2 months) and
every 12 000 km (7 500 miles, 24 months) thereafter.
To Next Page
Loading...
