CHASSIS 9-15
REMOVAL AND DISASSEMBLY
• Remove the front wheel. (!9-9)
• Remove the bolts, left and right and front fender.
• Remove the fasteners
1 and bolts
2.
• Remove the head light assembly and disconnect the cou-
plers.
• Loosen the front fork upper clamp bolt
3.
NOTE:
Slightly loosen the front fork cap bolts
4 before loosening the
lower clamp bolts to facilitate later disassembly.
• Loosen the front fork lower clamp bolts.
• Remove the front fork.
NOTE:
Hold the front fork by the hand to prevent sliding out of the steer-
ing stem.
• Separate the front fork cap bolt from the front fork outer tube.
• Compress the front fork spring with the special tool
A and
insert the special tool
B between the lock nut and the spacer.
% 09940-94930: Front fork spacer holder
A
09940-94922: Stopper plate
B (11 mm)
To Next Page
Loading...
