ENGINE 3-3
ENGINE REMOVAL AND INSTALLATION
ENGINE REMOVAL
Before taking the engine out of the frame, wash the engine
using a steam cleaner. Engine removal is sequentially explained
in the following steps. Reinstall the engine by reversing the
removal procedure.
• Drain engine oil. (!2-17)
• Drain engine coolant. (!2-20)
• Remove the frame side covers. (!9-5)
• Remove the fuel tank. (!6-3)
• Remove the frame head covers and radiator covers. (!9-6)
• Disconnect the battery
- lead wire.
• Remove the air cleaner chamber
1. (!6-13)
• Remove the exhaust pipes and mufflers
2. (!7-8)
• Remove the throttle body
3. (!6-15)
To Next Page
Loading...
