Suzuki Intruder VZR1800 - Inspection and Disassembly

CHASSIS 9-35
• Remove the O-ring

2.
INSPECTION AND DISASSEMBLY
WHEEL DAMPER
• Inspect the damper for wear or damage.
• Replace the damper if there is anything unusual.
• Remove the dampers with a screw driver.
WHEEL (!9-73)
WHEEL AXLE (!9-9)
TIRE (!2-27 and 9-73)
BRAKE DISC (!9-69)
• Remove the brake disc

1.
WHEEL BEARINGS
• Inspect the play of the wheel bearings by finger while they are
in the wheel. Rotate the inner race by finger to inspect for
abnormal noise and smooth rotation.
• Replace the bearing in the following procedure if there is any-
thing unusual.
• Remove the dust seal with the special tool.
% 09913-50121: Oil seal remover
$
The removed dust seal must be replaced with a new
one.