ENGINE 3-21
• Remove the thrust washer A.
• Remove the primary driven gear assembly B.
REAR CAM CHAIN TENSION ADJUSTER
• Unlock the ratchet 1 and insert the special tool.
% 09917-62430: Chain tensioner lock tool
• Remove the rear cam chain tensioner No. 1 assy 2.
• Remove the cam chain guide No. 1 3 and rear cam chain
tension adjuster No. 1 4.
REAR CAM CHAIN IDLER SPROCKET
• Remove the idler shaft 1.
• Disengage the cam chain No. 1 2 from the rear cam chain
idler sprocket 3.
• Remove the needle roller bearing C, spacer D and washer
E.
To Next Page
Loading...
