CHASSIS 9-55
CALIPER DISASSEMBLY
• Remove the pad spring
1.
• Remove the caliper air bleeder valve
2.
• Separate the caliper halves by removing the caliper housing
bolts
3 with the special tools.
% 09930-11920: Torx bit JT40H
09930-11940: Bit holder
• Remove the O-ring
4.
$
• Place a rag over the pistons to prevent it from popping out
and then force out the pistons using compressed air.
$
• Remove the dust seals
5 and piston seals
6.
$
Replace the O-ring with a new one.
Avoid using high pressure air to prevent piston dam-
age.
Avoid reusing the dust seals and piston seals to pre-
vent fluid leakage.
To Next Page
Loading...
