Suzuki Intruder VZR1800 - Excva Inspection; Excv Inspection; Cable Inspection

EXHAUST SYSTEM 7-3
• Disconnect the No. 2 cable

3 and then No. 1 cable

4 from
the pulley.
• Remove the EXCVA

5.
• Remove the EXCV cover

6 from the EXCV pulley.
• Disconnect the No. 1

7 and No. 2

8 cables.
EXCVA INSPECTION
!5-83
EXCV INSPECTION
• Turn the EXCV by hand and check that it moves smoothly.
• If it does not move smoothly, replace the EXCV together with
the muffler body.
• Decarbonize the EXCV if necessary.
#
CABLE INSPECTION
• Inspect the cables for wear or bend if it is damaged, replace it
with a new one.
NOTE:
The EXCV cables are identified by the plated chrome color and
shape.
No. 1 cable

1: 11276-48G0
No. 2 cable

2: 11277-48G0
* Do not attempt to disassemble the EXCV.
* The EXCV is available only as the muffler body
assembly.