7-10 EXHAUST SYSTEM
• Remove the exhaust pipes
6 and the No. 2 muffler
7.
INSTALLATION
Install the exhaust pipe and muffler in the reverse order of
removal. Play attention to the following points:
• Install the exhaust pipes
1 with the No. 2 muffler
2.
#
• Tighten the exhaust pipe bolts and No. 2 muffler bolts and nut
to the specified torque.
$ Exhaust pipe bolt : 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Muffler mounting bolt and nut: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Apply gas sealer to the exhaust pipe connectors.
EXHAUST GAS SEALER: PERMATEX 1372
#
Replace the gaskets with new ones.
Replace the exhaust pipe connector with new ones.
Apply PREMATEX 1372.
To Next Page
Loading...
