DRIVELINE/AXLE 4-13
FINAL BEVEL GEARS
CONSTRUCTION
!
1 Oil seal
A Final drive bavel gear
K Oil seal
2 Final gear bearing case
B Shims
L Propeller shaft
3 Shims
C Washer
M Universal joint
4 Final driven gear bearing
D Final drive bevel gear bearing
A Final gear case bolt (M8)
5 Final driven bevel gear
E Oil seal
B Final gear case bolt (M10)
6 Shims
F O-ring
C Oil drain plug
7 Final driven gear bearing
G Stopper plate
D Final gear case nut
8 Oil seal
H Final drive gear coupling
E Final driven gear coupling nut
9 Final gear case
I Spring
0 Final drive gear bearing
J Snap ring
ITEM N·m kgf-m lb-ft ITEM N·m kgf-m lb-ft
A 23 2.3 16.5
D 40 4.0 29.0
B 50 5.0 36.0
E 100 10.0 72.5
C 23 2.3 16.5
To Next Page
Loading...
