CHASSIS 9-41
REMOVAL
• Remove the exhaust pipe and muffler. (!7-8)
• Remove the rear wheel. (!9-34)
• Remove the final gear case. (!4-15)
• Remove the under plate
1.
• Remove the regulator/rectifier
2.
• Remove the rear shock absorber front mounting bolt and nut.
• Remove the rear shock absorber rear mounting bolt and nut.
• Remove the rear shock absorber
3.
• Remove the cushion rod mounting bolt and nut
4.
NOTE:
Slightly loosen the cushion lever mounting bolt or nut
A to facili-
tate later disassembly.
• Remove the brake pipe guide bolts.
To Next Page
Loading...
