9-36 CHASSIS
• Remove the wheel bearings on both sides with the special
tool.
% 09921-20240: Bearing remover set (25 mm)
$
REASSEMBLY AND INSTALLATION
Reassemble and install the rear wheel in the reverse order of
removal and disassembly. Pay attention to the following points:
The removed bearings should be replaced with new
ones.
Left Right
110 N·m
(11.0 kgf-m, 79.5 lb-ft)
E-02, 19, 24
100 N·m
(10.0 kgf-m, 72.5 lb-ft)
E-03, 28, 33
23 N·m
(2.3 kgf-m, 16.5 lb-ft)
To Next Page
Loading...
