Suzuki Intruder VZR1800 - Page 179

4-14 DRIVELINE/AXLE
Standard clearance

B: 2.8 mm (0.110 in)
Shim

2 size table
The shims

2 are available as a set (27326-48810).
Standard clearance

A: 1.00 mm (0.039 in)
Shim

1 size table
Shim

3 – Gear case cover clearance:
0.1 mm (0.004 in)
Shim

3 size table
Part number Thickness Part number Thickness
27445-24A01-030 0.30 mm (0.012 in) 27327-38B00-035 0.35 mm (0.014 in)
27445-24A01-035 0.35 mm (0.014 in) 27327-38B00-040 0.40 mm (0.016 in)
27445-24A01-040 0.40 mm (0.016 in) 27327-38B00-050 0.50 mm (0.020 in)
27445-24A01-050 0.50 mm (0.020 in) 27327-38B00-060 0.60 mm (0.024 in)
27445-24A01-060 0.60 mm (0.024 in) The shims

3 are available as a set
(27327-38810).
The shims

1 are available as a set
(27445-24810).
Part number Shim thickness
09181-40011 0.95 mm (0.026 in)
09181-40013 1.05 mm (0.041 in)
09181-40014 1.10 mm (0.043 in)
09181-40176 1.20 mm (0.047 in)
09181-40182 1.40 mm (0.055 in)
09181-40212 1.50 mm (0.059 in)
27326-48G00-125 1.25 mm (0.049 in)
27326-48G00-135 1.35 mm (0.053 in)
27326-48G00-145
1.45 mm (0.057 in)