Suzuki Intruder VZR1800 - Page 168

DRIVELINE/AXLE 4-3
Adjust backlash by selecting shims. (Use two pieces of shims.)
Shim

1 size table
The shims

1 are available as a set (24945-26810).
Shim

2 size table
The shims

2

are available as a set (24935-48810).
Part number Thickness
24945-26D00-030 0.30 mm (0.012 in)
24945-26D00-035 0.35 mm (0.014 in)
24945-26D00-040 0.40 mm (0.016 in)
24945-26D00-050 0.50 mm (0.020 in)
24945-26D00-060 0.60 mm (0.024 in)
Part number Thickness
24935-48G00-040 0.40 mm (0.016 in)
24935-48G00-045 0.45 mm (0.018 in)
24935-48G00-050 0.50 mm (0.020 in)
24935-48G00-055 0.55 mm (0.022 in)
24935-48G00-060 0.60 mm (0.024 in)
24935-48G00-065 0.65 mm (0.026 in)
24935-48G00-070 0.70 mm (0.028 in)
24935-48G00-075 0.75 mm (0.030 in)
24935-48G00-080
0.80 mm (0.031 in)
Backlash
0.03 – 0.15 mm
(0.001 – 0.006 in)