CHASSIS 9-13
WHEEL
• Install the collar
1 in the left side.
• Install the front wheel with the front axle and tighten the front
axle with hand temporarily.
)
FRONT AXLE
• Tighten the front axle to the specified torque.
% 09900-18740: Hexagon socket (24 mm)
# Front axle bolt: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
BRAKE CALIPER
• Tighten the brake caliper mounting bolts, left and right to the
specified torque.
# Front brake caliper mounting bolt:
39 N·m (3.9 kgf-m, 28.0 lb-ft)
• Move the front fork up and down 4 or 5 times.
• Tighten two axle pinch bolts on the right front fork leg to the
specified torque.
# Front axle pinch bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
NOTE:
After remounting the front wheel, pump the brake lever a few
times to check for proper brake operation.
The directional arrow on the tire should point to the
wheel rotation, when remounting the wheel.
To Next Page
Loading...
