PARKING AND REAR BRAKE 5C-3
1. Brake back plate:
Clean back plate and apply thin coat of Bentonite base brake grease (anti-squeal
agent) to six surfaces on which shoe rims rest.
9. Piston assembly 17. Parking brake cable
2. Brake shoe 10. Cover 18. Wheel speed sensor
···if equipped with ABS
3. Retractor spring 11. Sensor ring
···
if equipped with ABS
19. Adjuster cover
4. Brake adjuster (strut):
Apply Bentonite base brake grease between actuator and shoe rim and at actuator
pivot points.
12. Circlip [A] 2WD model
5. Parking brake shoe lever 13. Wheel bearing [B] 4WD model
6. Adjuster actuator 14. Brake drum Tightening torque
7. Adjuster spring 15. Spindle nut Do not reuse.
8. Wheel cylinder 16. Spindle cap
[B]
[A]
11
12 13
14
15
14
16
175 N·m (17.5 kg-m)
18
17
19
9 N·m (0.9 kg-m)
2
To Next Page
Loading...
