7A2-38 MANUAL TRANSAXLE (M13 ENGINE)
11) Press-fit 4th gear (2) using the same procedure as step 10).
12) Install left bearing cone (1) using special tools and hammer.
Special tool
(A): 09923-78210
(E): 09925-98221
Gear Shift Shaft Components
NOTE:
For protection of right bearing cone (3), always support
shaft with special tool as illustrated.
1. Low speed gear shift shaft 5. 5th & reverse gear shift guide shaft 9. Reverse gear shift lever bolt
: Apply thread lock 99000-32110 to all
around thread part to bolt.
2. High speed gear shift shaft 6. Reverse gear shift arm Tightening torque
3. 5th & reverse gear shift shaft 7. 5th gear shift fork Do not reuse.
4. Reverse gear shift lever 8. Gear shift locating bolt
: Apply sealant 99000-31260 to bolt thread.
To Next Page
Loading...
