FRONT SUSPENSION 3D-3
Diagnosis
Wheel Disc, Bolt & Bearing Check
1) Inspect each wheel disc for dents, distortion and cracks. A
disc in badly damaged condition must be replaced.
2) Check wheel bolts for tightness and retighten them to specifi-
cation as necessary.
Tightening torque
Wheel bolt (a): 95 N
·
m (9.5 kg-m, 69.0 lb-ft)
3) By rotating wheel actually, check wheel bearing for noise and
smooth rotation. If defective, replace bearing.
4) Check wheel bearing for wear. When measuring thrust play,
a) Remove wheel.
b) Fix brake disc tightening wheel bolts.
c) Set a dial gauge.
d) Check wheel bearing for thrust play.
When measurement exceeds limit, replace bearing.
Thrust play limit “a”: 0.1 mm (0.004 in.)
To Next Page
Loading...
