0A-4 GENERAL INFORMATION
Diagnosis
• When troubleshooting air bag system, be sure to follow
“Diagnosis” in Section 10B. Bypassing these procedures
may result in extended diagnostic time, incorrect diagnosis,
and incorrect parts replacement.
• Never use electrical test equipment other than that specified
in this manual.
WARNING:
Never attempt to measure the resistance of the air bag
(inflator) modules (driver, passenger and side) and seat
belt pretensioners (driver and passenger). It is very dan-
gerous as the electric current from the tester may deploy
the air bag or activate the pretensioner.
To Next Page
Loading...
Need help?
General
