0A-12 GENERAL INFORMATION
Precautions for Electrical Circuit Service
• When replacing a fuse, make sure to use a fuse of the
specified capacity. Use of a fuse with a larger capacity
will cause a damage to the electrical parts and a fire.
• When disconnecting and connecting coupler, make sure
to turn ignition switch OFF, or electronic parts may get
damaged.
• When disconnecting connectors, never pull the wiring
harness. Unlock the connector lock first and then pull
them apart by holding connectors themselves.
• When connecting connectors, also hold connectors and
put them together until they lock securely (a click is
heard).
To Next Page
Loading...
