7A2-8 MANUAL TRANSAXLE (M13 ENGINE)
Gear Shift Control Lever and Cable Components
1. Gear shift control lever knob 5. Gear select control cable 9. Cable mounting bolt
2. Lever boot holder 6. Gear shift control lever assembly mounting
nut
10. Cable bracket bolt
3. Gear shift lever boot 7. Gear shift control lever assembly
: Apply grease 99000-25010 to pin ends to
which shift and select cables are connected.
Tightening torque
4. Gear shift control cable 8. Cable lock nut
To Next Page
Loading...
