AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-175
5) Install lubrication LH tube (1) and RH tube (2).
6) Install fluid reservoir RH plate (1) and lubrication tube clamp
(2).
Tightening torque
Lubrication tube clamp bolt
(a): 5.5 N·m (0.55 kg-m, 4.0 lb-ft)
Fluid reservoir RH plate bolt
(b): 5.5 N·m (0.55 kg-m, 4.0 lb-ft)
Transaxle case
Disassembly
1) Remove differential side oil seal (1).
2) Remove countershaft LH bearing cup and shim with special
tools.
Special tool
(A): 09944-96011
(B): 09942-15511
To Next Page
Loading...
