REAR DIFFERENTIAL 7F-5
Unit Repair Overhaul
1. Drive bevel pinion nut
: After tightening nut so as rotational torque
of drive bevel pinion to be in specified
torque, caulk nut securely.
10. Drive bevel pinion rear taper roller
bearing
19. Differential pinion
2. Companion flange 11. Bevel pinion shim 20. Differential side gear washer
3. Oil seal
: Apply grease 99000-25010 to oil seal lip.
12. Drive bevel pinion (hypoid gear) 21. Differential side gear
4. Drive bevel pinion front taper roller bearing 13. Drive bevel gear (hypoid gear) 22. Differential pinion shaft
5. Differential carrier bolt
: Apply sealant 99000-31260 to thread part.
14. Differential side bearing 23. Differential side gear spring washer
6. Differential carrier 15. Differential side bearing shim 24. Differential pinion shaft pin
7. Differential side bearing cap 16. Drive bevel gear bolt
: Apply thread lock cement 99000-
32110 to thread.
Do not reuse.
8. Differential side bearing cap bolt 17. Differential case Tightening torque
9. Spacer 18. Differential pinion washer Apply differential oil.
To Next Page
Loading...
