Swan Analytical Instruments AMI Turbiwell

Questions and Answers

J
James GarciaAug 4, 2025
What to do if I get Verification Errors on my Swan Analytical Instruments Laboratory Equipment?
- J
  Jonathon HahnAug 5, 2025
  Verification errors with Swan Analytical Instruments Laboratory Equipment can occur due to several reasons. First, the verification kit might be dirty, so cleaning it is recommended. Second, the verification kit reference value might be incorrect, in this case perform a new matching and check if the correct Verikit is in use. Finally, using the wrong Verikit can cause this error, so ensure the correct Verikit is being used.
J
Jose BennettAug 15, 2025
Why am I getting Calibration Errors on my Swan Analytical Instruments Laboratory Equipment?
- A
  aprilmartinAug 15, 2025
  Calibration errors in Swan Analytical Instruments Laboratory Equipment can stem from a wrong formazine standard. Check the formazine standard and prepare a new one if necessary. Another potential cause is a dirty measuring chamber. In this case, clean the measuring chamber.
J
jesusflynnAug 26, 2025
How to fix Matching Errors on Swan Analytical Instruments AMI Turbiwell Laboratory Equipment?
- F
  Frank JoyceAug 26, 2025
  Matching errors on Swan Analytical Instruments Laboratory Equipment can arise from calibration issues. If this happens, perform a new calibration. Also, a dirty verification kit can cause this, so cleaning the verification kit is recommended.

Summary

Safety Instructions

General Safety Information

Explains potential risks, safety practices, target audience, and operator qualifications.

Warning Notices and Signs

Defines DANGER, WARNING, CAUTION symbols and mandatory signs.

General Safety Regulations

Covers legal requirements, use of spare parts, and modifications.

Restrictions for Use

Details sample flow rate, temperature, and specific measurement limits.

Product Description

Application and Models

Describes the instrument's uses and lists available models.

Instrument Specifications

Lists technical details including power, housing, range, and display.

Measuring Principle

Explains the nephelometric system and how the instrument measures turbidity.

Interface Options

Details available communication interfaces like Profibus, Modbus, HART, and USB.

Installation

Installation Checklist

Outlines on-site requirements and steps for instrument installation.

Mounting the Instrument Panel

Provides instructions for mounting the instrument panel.

Electrical Connections

Details cable thickness, wire specifications, and connection requirements.

Power Supply Installation

Specifies requirements for connecting the instrument's power supply.

Instrument Setup

Initial Setup Steps

Covers opening sample flow, programming, and run-in period.

Adjusting the deltaT Flow Sensor

Procedure for adjusting the deltaT flow sensor for accurate measurements.

Calibration, Matching, and Verification

Explains calibration, verikit matching, and performance verification.

ppm Calculation Setup

Details for calibrating and using the instrument for ppm measurements.

Operation

Instrument Key Functions

Explains the purpose of each button on the instrument's interface.

Display Values and Symbols

Defines the meaning of displayed values and operational symbols.

Changing Parameters and Values

Illustrates how to modify instrument parameters and settings.

Maintenance

Maintenance Schedule

Provides a recommended schedule for preventive maintenance tasks.

Cleaning Procedures

Guides for cleaning the measuring chamber and the degasser.

Calibration and Verification

Explains calibration process and instrument performance verification.

Wet Verification

Details the procedure for performing a wet verification.

Troubleshooting

Common Error Types

Lists errors related to calibration, matching, and verification.

Error List and Acknowledgement

Explains error codes and the procedure for acknowledging errors.

Replacing Fuses

Instructions for safely replacing instrument fuses.

Program Overview

Messages (Main Menu 1)

Overview of the Messages menu for errors and maintenance tasks.

Diagnostics (Main Menu 2)

Overview of the Diagnostics menu for instrument and sample data.

Maintenance (Main Menu 3)

Overview of the Maintenance menu for calibration and service.

Operation (Main Menu 4)

Overview of the Operation menu for user-adjustable parameters.

Program List and Explanations

Messages and Diagnostics Details

Detailed explanations for messages, sensor data, and history logs.

Maintenance and Interface Details

Explains maintenance procedures and interface communication settings.

Default Values

Notes