Adding / deleting
channels
The channels you no longer
receive or seldom watch can
be deleted from the memory.
You also may add channels into
memory.
1
Press [SETUP].
2
Using [K / L], select “Channel”.
Press [ENTER].
Channel menu will appear.
3
Using [K / L], select “Manual
Preset”. Press [ENTER].
Manual Preset menu will appear.
4
Select the channel number to
add or delete.
Press [{] or [CH L] to move to a
smaller channel number.
Press [B] or [CH K] to move to a
larger channel number.
• Use
[{ / B] to move through
the channels one by one,
including the ones not in the
channel memory, while using
[CH K / L] to move through the
channels only in the channel
memory.
Press the Number buttons to
select a channel number directly.
5
Using [K / L], select “Add” or
“Delete”. Press [ENTER].
The channel number will be
added or deleted from the channel
memory. Then the next channel
number will appear so that you
can continue adding or deleting
channels.
6
Press [SETUP] to exit.
Getting started
Channel setting (cont’d)
To Next Page
Loading...
