Video mode is the default
recording format for DVD-RW.
You can change it to VR mode
from the Setup Menu.
1
Press [SETUP].
2
Using [K / L], select “Disc”.
Press [ENTER].
Disc menu will appear.
3
Using [K / L], select “Format”.
Press [ENTER].
Format menu will appear.
4
Using [K / L], select “Start”.
Press [ENTER].
Final confirmation window will appear.
5
Using [K / L], select “Yes”.
Press [ENTER].
Formatting will start.
6
Formatting is completed.
100% will be indicated.
XXXX
Recording
Formatting a disc (cont’d)
Note
• When you reformat the disc,
all contents of the disc will be
erased.
• If you want to cancel
formatting at step 5, select
“No”.
• A disc once formatted with
this unit cannot be used on
other DVD recorders.
You can set a specified time for
chapter marks.
1
Press [SETUP].
2
Using [K / L], select
“Recording”. Press [ENTER].
3
Using [K / L], select “Auto
Chapter”. Press [ENTER].
Option window will appear.
“10 minutes” has been selected as
the default.
4
Using [K / L], select a desired
time option. Press [ENTER].
5
Press [SETUP] to exit.
Setting for Auto Chapter
To Next Page
Loading...
