4
• If you do not know your PBS
channel number in your area:
Using [
K / L], select “Auto”.
Press [ENTER].
The setting will be activated.
•
If you know your PBS channel
number in your area:
Using [
K / L], select
“Manual”. Press [ENTER].
Using the Number buttons
or [K / L], enter your PBS
channel number with Number
buttons. Press [ENTER].
The setting will be activated.
• If you want to set the clock
manually and cancel the Auto
Clock Setting function: Using
[K / L], select “OFF”. Press
[ENTER].
The Auto Clock Setting function
will be canceled.
5
Press [SETUP] to exit.
6
Press [POWER] to turn off the
unit.
This unit will search for the clock
time only when the power is off.
Leave it off for several minutes to
give this unit time to set the clock
on the display of the front panel.
Set the clock before you try the
Timer Programming. If Public
Broadcasting Service (PBS) is
available in your area, follow the
“Auto Clock Setting” below. If not,
follow the “Manual Clock Setting”
on page 23.
Auto Clock Setting
Make sure
• The antenna/Cable TV
connections are correct.
• If this unit is connected to a
Cable Box or Satellite Box,
select the local PBS station
on them to set the clock
automatically.
1
Press [SETUP].
2
Using [K / L], select “Clock”.
Press [ENTER].
Clock menu will appear.
3
Using [K / L], select “Auto
Clock Setting”. Press [ENTER].
Option window will appear.
The default setting is “Auto”.
Getting started
Setting the clock
Note
• The clock may set itself
automatically after you
connect the antenna/cable
signal to this unit and plug in
the power cord. In this case,
the current time will appear
on the front panel display.
• If the current time is not
displayed or the displayed
clock time is not correct, set
the clock manually.
To Next Page
Loading...
