When playing back a DVD-Video
disc recorded with two or more
soundtracks (these are often in
different languages), you can
switch between them during
playback.
On DVD-RW discs recorded in VR
mode, you can switch to main (L),
sub audio (R) or a mix of both (L/R).
When playing back Audio CDs
files, you can switch among
stereo, the left channel only and
the right channel only.
1
During playback, press [DISPLAY].
The Display menu will appear.
2
Using [{ / B], select . Press
[ENTER].
Audio menu will appear.
<DVD-Video>
<DVD-RW VR mode>
3
Using [K / L], select a desired
audio soundtrack or audio chan-
nel. Press [ENTER].
<DVD-Video>
Audio soundtrack will switch.
<DVD-RW VR mode>
Audio channel menu will appear.
Follow step 3.
Audio channel will change.
4
Using [K / L], select a desired
audio channel. Press [ENTER].
Audio channel will change.
xxxx
Playing discs
Recording Playing discs EditingBefore you start Connections Getting started
Changing the
Setup menu VCR functions Others
Español
Selecting a format of audio and video (cont’d)
Note
• Some discs will only allow
you to change the soundtrack
from the Disc menu. Press
[TOP MENU] or
[MENU/LIST] to display the
Disc menu.
• On DVD-RW discs recorded
in VR mode with both main
and sub audio, you can
switch to main (L), sub audio
(R) or a mix of both (L/R).
• This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
You can enjoy stereophonic virtual
space through your exciting 2
channel stereo system.
1
During playback, press [DISPLAY].
The Display menu will appear.
2
Using [{ / B], select . Press
[ENTER].
Virtual Surround menu will appear.
<DVD-Video>
<DVD-RW VR mode>
<MP3 / WMA files>
Note
• Select Virtual Surround OFF
in a case sound is dissorted.
• The setting will be kept OFF
when the unit is turned off.
To Next Page
Loading...
