Chapter 11 123Scan
Introduction
123Scan² is an easy-to-use, PC-based software tool that enables the quick and easy setup of Motorola scanners.
123Scan² uses a wizard tool to guide users through a streamlined set up process. Once parameters are set, the
values are saved to a configuration file that can be distributed via e-mail, electronically downloaded via a USB or
RS-232 cable, or used to generate a sheet of programming bar codes that can be scanned.
123Scan² can generate multiple reports that can be easily rebranded using Microsoft Word or Access. Report
options include programmed parameters, asset tracking information and proof of scanner output.
Additionally, 123Scan² can display scanned bar code data including non-printable characters. It can display,
optimize and save pictures from an imaging scanner. It can also upgrade scanner firmware, automatically check
online to enable support for newly released products, generate a single 2D bar code for one scan programming
and stage large numbers of scanners simultaneously via USB hub(s).
Communication with 123Scan2
To communicate with the 123Scan² program which runs on a host computer running a Windows XP SP2 and
Windows 7 operating system, use a USB cable to connect the scanner cradle to the host computer (see
Connecting a USB Interface on page -1).
To Next Page
Loading...
