12713140-002-2 Revision E – October 2006 SSU-2000e User’s Guide 103
Chapter 3 Provisioning and Operating the SSU-2000e
Setting Security Parameters
M 123 COMPLD
"\"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\""
"\"NOTICE: THIS IS A PRIVATE COMPUTER SYSTEM. \""
"\"UNAUTHORIZED ACCESS OR USE MAY LEAD TO PROSECUTION.\""
"\"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\""
;
Logging In with an Expired Password
Your password can expire after a preset number of days. This procedure illustrates
how to log in when the password
assigned to you has expired. You can use either
ICS or TL1 commands, depending on the port you use
.
Using ICS Commands
1. Connect a computer to a serial port on the SSU-2000e using the procedure in
Establishing a Connection With the SSU-2000e, on page 90. A prompt to enter a
username appears.
2. Type your user name then press Enter. The system prompts for a password.
3. Type your
password then press Enter. The following text appears:
pSOSystem (172.16.21.19)
Username: DAVID
Password:
Symmetricom Technical Support
1-888-367-7966 toll free USA
1-408-428-7907 worldwide
SSU_2000e, 2006-02-22T16:56:30 DOY:53
14313012-005-5, F.00, 02FEB06
PASSWORD EXPIRED AND NEED A NEW PASSWORD
4. Type a new password, and press Enter, then retype the password exactly as
before, then press Enter to confirm. The following text appears followed by the
system prompt, showing that you have access to the system.
New Password: **********
Confirm Pwd: **********
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NOTICE: THIS IS A PRIVATE COMPUTER SYSTEM.
UNAUTHORIZED ACCESS OR USE MAY LEAD TO PROSECUTION.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SSU_2000e->
You need to store the new password in a safe location to prevent a service call to
Symmetricom Global Services.
To Next Page
Loading...
Need help?
General
