12713140-002-2 Revision E – October 2006 SSU-2000e User’s Guide 15
How to Use This Guide
Conventions Used in This Guide
This guide uses the following conventions:
Acronyms and Abbreviations – Terms are spelled out the first time they appear
in text. Thereafter, only the acronym or abbreviation is used.
Revision Control – The title page lists the printing date and versions of the
product this guide describes.
Typographical Conventions – This guide uses the typographical conventions
described in the table below.
Chapter 3, Provisioning and
Operating the SSU-2000e
Describes
the ICS and TL1 commands required to provision the
SSU-2000e after installing the unit.
Chapter 4, Commissioning the
SSU-2000e
Provides checklist-based commissioning tests that should be
performed after completing turn-up and software configuration to
ensure the system is ready for normal operation.
Chapter 5, Maintenance and
Troubleshooting
Contains preventive and corrective maintenance, and
troubleshooting procedures for the product.
Chapter 6, Clock Module
Reference Data
Provides detailed information on the Communications module and
the various Clock modules available for use in the SSU-2000e.
Chapter 7, Input Module
Reference Data
Contains detailed information on the Input modules available for
use in the SSU-2000e.
Chapter 8, Output Module
Reference Data
Describes the Output modules available for use in the SSU-2000e
and in the SDU-2000e.
Chapter 9, Hardware
Configuration Guide
Describes how to configure the SSU-2000e in several modes, and
lists part number for shelves, modules, and accessories.
Index Provides references to individual topics within this guide.
When text appears
this way...
... it means:
SSU-2000e User’s Guide The title of a document.
SSU
CRITICAL
IOC1
An operating mode, alarm state, status, or chassis
label.
Select File, Open... Click the Open option on the File menu.
Chapter, Title
Description
To Next Page
Loading...
Need help?
General
