TMSL 097-45018-02 Issue 3: Mar 96
Page 82
RETRIEVE PERFORMANCE MONITORING T1 (Contd)
montype (Contd):
For MRC-E and MRC-EA only:
BPV = bipolar violations
CRC = cyclic redundancy check errors
OOF = out of frame errors
LOS = loss of signal
AIS = alarm indication signal
FREQ = pair-wise frequency error threshold being exceeded
ALL = all the above montypes
<null> = all the above montypes
Note: If the aid is MRC-1-x or MRC-2-x, and analog is the input, BPV, CRC,
OOF, and AIS parameter types report -1 error counts.
tmper: 1-DAY = Accumulation time period (24 hours) for the specified perfor-
mance-monitoring information
15-min = last 15-minute period
<null> = last 15-minute period
mondat: For PSM only:
mm-dd = where mm = month, dd = day (current or previous day only)
<null> = current day
mondat: For MRC-E and MRC-EA only:
<null> = current day
montm: For PSM only:
hh-0 = where hh = 0, 1, ..., 23 (hour of the day)
hh-15 = 15 minutes past the hour (hh)
hh-30 = 30 minutes past the hour (hh)
hh-45 = 45 minutes past the hour (hh)
<null> = current time period of current day
montm: For MRC-E and MRC-EA only:
<null> = current time period of current day
montm: For PSM only:
1-DAY = past 24 hour period; applies to TOTALSLIP only
15-min = specified 15 minute period beginning at the time specified in the
montm field
<null> = current time period of current day
montm: For MRC-E and MRC-EA only:
15-min = current 15-minute time period of the current day
<null> = current time period of the current day
To Next Page
Loading...
Need help?
General
