User Code Setup (cont'd)
36
ACTION SCREEN
4. Type in the user name and press the
OK
button. The “User Options” screen is
displayed with
Enter User Code…
displayed.
5. Touch the box next to with
Enter User
Code…
The "User Authorization" screen is
displayed with the instructions
Enter 4 Digits
.
6. Enter the 4-digit code for this user. The
“User Options” screen is displayed with the
user’s name and code displayed.
Select the partitions and access level for this
user.
NOTE:
If this user is to have Internet or
Message Center access, continue to step 7. If
this user is to have security access only, press
the
SAVE
button at this time.
To Next Page
Loading...