AIRCRAFT
SA160
AIRCRAFTA I R C R A F T
Symphony
thecorrect universal time.)
- With power on, place the selector switch in the 'straight
up' position (between the 'RUN' and 'STOP' positions). The display
shouldgoblank.
Turn the power off for a few seconds, then back on. The
displaywillnowalternately show 'UTC?' and 'LOC?'.
Whenthedisplayshows'LOC?',movetheselectorswitch
to the 'HRS' position. When the hours value gets to the correct
hour, move the switch to the 'straight up' position as before. The
display will read 'LOC rdy'. Wait for this message to disappear,
thenmovethe selector to any desired position. (You can now check
'LOC' for the correct local time). NOTE: Since universal and local
minutesandsecondsarethesame,youcanonlysetlocalhours.
Simply move the selector to the 'UTC' position. The display will
show universal time in hours, minutes and seconds. A distinct
graphic pattern is also displayed to indicate that the 'time' mode is
active.
SETTING LOCAL TIME:
STEP 1
STEP 2 -
STEP 3 -
:
TIME FUNCTIONS
'UTC' UNIVERSAL TIME COORDINATED
'LOC' LOCAL TIME
4.17 CHRONOMETER MODES
Feb 25, 2005
22 of 27
To Next Page
Loading...