SA160
AIRCRAFTA I R C R A F T
Symphony
AIRCRAFT
Move the selector to the 'LOC' position. The display will show
LOCal time in hours, minutes and seconds. A distinct graphic
pattern is also displayed to indicate that one of the two 'time'
modesisactive.
Move the selector to the 'FLT' position. The display will show the
total time in hours, minutes and seconds since the system was last
'powered-up'. This is useful for your log book entries and in- flight
time keeping. Be sure to note the 'FLT' time before shutting off the
masterasitisclearedatnext'power-up'.
- Move the selector switch to the 'STOP' position. The
displaywillfreeze.
When you want to begin timing, simply move the selector
to the 'RUN' position and the display will begin counting up. An
additional feature is that other functions (such as 'UTC', 'LOC', and
'FLT') are available while the stop watch is counting.
- When you want to stop timing, simply select 'STOP' and
thetimeisfrozenforyoutoobserve and/or record.
- First, you will 'pre-set' your timer by moving the selector
to the appropriate 'SEC' (seconds), 'MIN' (minutes) and 'HRS'
'FLT' FLIGHT TIMER
'COUNT UP' STOP WATCH FUNCTION
STEP 1
STEP 2 -
STEP 3
'COUNT DOWN' STOP WATCH FUNCTION
STEP 1
Feb 25, 2005
23 of 27
To Next Page
Loading...