Syntec 22/220 Series - Page 67

机床产品/Machine Tool Products
              –
              22/220 Series Controller Application Manual
Software Installation、Data Backup/Restore–67
•
•
•
3.
a.
i.
ii.
iii.
b.
•
•
c.
•
•
d.
•
•
e.
•
•
4.
a.
b.
i.
ii.
c.
i.
ii.
d.
i.
ii.
e.
i.
ii.
f.
i.
ii.
5.
•
•
•
•
6.
Directory::BackupOnly\Syntec
File name: BatteryLog*.dat
Provides after versions 10.118.12P, 10.118.21 (included).
Syntec Standard Kernel Scope Records ( Alarm(1~3Axis), Service, Daily,
Alarm(4~6Axis) )
Provides versions:
i.MX6 Controller: Kernel Scope Function added for
versions10.118.23W，10.118.28J，10.118.34 and later.
AM3354 Controller: Kernel Scope Function added for
versions10.118.23X，10.118.28K，10.118.35 and later.
10.118.48P, 10.118.52J, 10.118.56D, 10.118.58 and later versions support
alarm record(4~6Axis).
Alarm Records(1~3Axis):
Directory:BackupOnly\Syntec\Alarm
FileName：Alarm_*.csv （* the date and time when the file created:
MMDDhhmm ）
Service Records:
Directory:BackupOnly\Syntec\Service
FileName：Service_*.csv （* the date and time when the file created:
MMDDhhmm ）
Daily Records:
Directory:BackupOnly\Syntec\Daily
FileName：Daily_*.csv （*thedate and time when the file created:
MMDDhhmm ）
Alarm Records(4~6Axis):
Directory: BackupOnly\Syntec\Alarm456
FileName：Alarm456_*.csv （* the date and time when the file created:
MMDDhhmm ）
System Status Records
Valid version:10.118.23Z, 10.118.28M, 10.118.37 or later.
Software：
Directory：BackupOnly\Syntec\Reliability\NcSoftware
FileName：NcSoftware_*.csv （* the last updated date: YYYYMMDD）
Drive Soft.：
Directory：BackupOnly\Syntec\Reliability\DrvSoftware
FileName：DrvSoftware_*.csv（* the last updated date: YYYYMMDD）
Firmware：
Directory：BackupOnly\Syntec\Reliability\Firmware
FileName：Firmware_*.csv（* the last updated date: YYYYMMDD）
Servo：
Directory：BackupOnly\Syntec\Reliability\Motor
FileName：Motor_*.csv（* the last updated date: YYYYMMDD）
Hardware：
Directory：BackupOnly\Syntec\Reliability\Hardware
FileName：Hardware_*.csv（* the last updated date: YYYYMMDD）
MMILog
Directory: BackupOnly\Syntec
Records the error message when system exception occurs, and diagnostic
information about MMI.
Valid version: 10.118.22Y, 10.118.23Y, 10.118.28L, 10.118.36
Renamed from Exception Logto MMILog after version: 10.118.30S, 10.118.32S,
10.118.40W, 10.118.42W, 10.118.48H, 10.118.52B, 10.118.53
Collision Log