8 Radio Controls and Indicators
Radio
Indicators
In combination, the radio’s LED indicators and
control head display indicators provide you with
visual information on the state of your radio. The
radio indicators are summarized in the following
tables.
LED Indicators
Indicator Name Meaning
Call LED Steady: Your radio has received a
2-tone or 5-tone call.
Flashing: Your radio received a
call which was not answered.
Status LED Your radio is ready for you to
select a status code relating to
your current activity.
Channel LED Steady: Your radio is ready for
you to enter information to
select a new channel.
Flashing: The current channel is
in repeater talkaround mode.
Alphanumeric
LED
You can enter information, such
as an alpha symbol label, from
the keypad.
Monitor LED Steady: The signaling mute (if this
option has been programmed)
has been overridden. This may be
because the microphone is off the
microphone clip, or because you
have pressed the monitor key.
Flashing: Monitor key has been
pressed for long enough to over-
ride RF squelch.
Note that when the radio is oper-
ating normally, this indicator is off.
To Next Page
Loading...
Need help?
General
