26 5-Tone Signaling
Deferred Calling
If the channel you are making a call on is busy, the
radio may be programmed to store the call and send
it again once the channel is free.
If the call is being resent and you wish to cancel it,
press any key.
Immediate Callback
If you did not answer a call, and the call is not
queued, the call LED remains flashing ( ).
The caller’s number and status may also be dis-
played. If the caller’s identity is displayed, you can
call back the caller by a press of the enter key
(
)
.
Unanswered Call Alert
If you do not answer the call within a short time,
the ringing tone stops. The radio may then be pro-
grammed to switch on another alerting device, such
as a car horn, to attract your attention.
To Next Page
Loading...
