Tait t2020 User Guide

User Function Menu 35
Altering User
Options
If you are not sure what user function menu options
are available, enter user function menu entry mode,
and scroll through the list of menu options.
Note: The menu options
CALL QUE
,
DIVERT
,
PROG SIG
and
PROG GRP
allow you to access
user programmable features. The table
above gives reference pages for these features.
Accessing the User Function Menu
1. Press the function key ( ) to enter user
function menu entry mode. The scrolling
available indicator (
)
appears in the control
head display.
2. Use the up and down scroll keys ( / )
to move through the list of menu options.
3. To leave user function menu entry mode, press
another mode key (function, call, status, channel
or alphanumeric).
DTMF BUF/NOR Switches the DTMF dialing type between
buffered (tones sent together) and nor-
mal (tones sent as each key is pressed).
CALL QUE Accesses call queue entry mode. See “Call
Queuing” on page 36.
DIVERT Accesses call diversion setup mode. See
“Call Diversion” on page 38.
PROG SIG Accesses signal programming mode. See
“Programmable Channel Signaling” on
page 40.
PROG GRP Accesses group programming mode. See
“Programmable Scanning and Voting
Groups” on page 42.
Display Settings Meaning

Tait t2020 Specifications

General

Brand	Tait
Model	t2020
Category	Radio
Language	English