5-Tone Signaling 25
2. Use the up and down scroll keys ( / )
to move through the list of status messages until
the required message is displayed, or
enter the status number using the keypad.
3. Press the enter key ( ) to confirm your
choice. The status message selected may be sent
with your next 5-tone call.
Other 5-Tone
Features
Other 5-tone features that may be programmed are:
■ call diversion,
■ call queuing,
■ deferred calling,
■ immediate callback, and
■ unanswered call alert.
Call Diversion
Call diversion allows the radio user to divert
received calls to a third party. The calling radio rec-
ognizes the diversion message from the called radio
and switches to the requested diversion channel. See
“Call Diversion” on page 38 for further details.
Call Queuing
Your radio may be programmed to queue up to 10
incoming calls. If this feature is enabled, the caller’s
number is put in the queue after the ringing stops.
All other call indicators are cleared when the
received call has been queued. See “Call Queuing”
on page 36 for further details.
To Next Page
Loading...
Need help?
General
