28 2-Tone Decoding
2-Tone Decoding
2-tone signaling is used with conventional systems
to selectively call either individual or groups of
radios, using two sets of programmed decodes. Your
radio may be programmed to decode 2-tone calls.
Receiving a
2-Tone Call
When a 2-tone encoded call is received, the radio
gives a beep, indicating which type of 2-tone call
has been decoded.
■ When receiving a 2-tone individual call, the
radio gives a long beep.
■ When receiving a 2-tone group call, the radio
gives two medium beeps.
■ When receiving a 2-tone super group call, the
radio gives three short beeps.
To accept the call, press the PTT key and begin
speaking.
To Next Page
Loading...
Need help?
General
