User Function Menu 37
Call Queue Not Empty
When a call has been queued, the radio automati-
cally switches to user function menu entry mode
after a period of user inactivity. When this happens,
CALL QUE
appears in the control head display and
the function LED flashes ( ).
Accessing the Call Queue
1. Press the function key ( ) to enter user
function menu entry mode. The scrolling
available indicator (
)
appears in the control
head display, along with the last item viewed in
user function menu entry mode.
2. Use the up and down scroll keys ( / )
to move through the list of menu options until
the
CALL QUE
option is displayed.
Note: The
CALL QUE
option only appears
if there are calls queued.
3. Press the enter key (
)
to enter call queue
entry mode, and the first call in the queue is
displayed.
The display shows the call’s position in the
queue (
01
) and the number of calls in the queue
(
02
).
4. Press the enter key (
)
to display the caller’s
number and use the up and down scroll keys
To Next Page
Loading...
Need help?
General
