Tait t2020 User Guide

Radio Controls and Indicators 9
Control Head Display Indicators
Auxiliary LED Indicates the state of the auxiliary
options switch.
The programmed configuration
of the auxiliary options switch
determines whether this indica-
tor is displayed continuously , not
displayed continuously, or is only
displayed when the auxiliary key
is pressed.
Function LED Steady: You can change user pro-
grammable options.
Flashing: There is a queued 5-
tone call.
Enter LED You have pressed the enter key.
Call, Status,
Channel,
Alphanumeric
and Function
LEDs
When none of these LEDs are
illuminated, the radio is operat-
ing in DTMF mode (see “DTMF
Calls” on page 29).
Indicator Name Meaning
BUSY Busy Indicator There is activity on the current
channel. If the selective call mute
is active (see the monitor key
function description on page 15),
you may not hear the traffic until
you lift your microphone off the
microphone clip.
Transmit
Indicator
Your radio is transmitting. This
message is displayed when you
press the PTT key. This message is
also displayed briefly when you
make a 5-tone, G-STAR, DTMF or
alpha symbol call.
Indicator Name Meaning

Tait t2020 Specifications

General

Brand	Tait
Model	t2020
Category	Radio
Language	English